This paper describes the use of one-dimensional (1D) poly(3,4-ethylenedioxythiophene) nanorod (n-PEDOT) and modified poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films as anode buffer layers in polymer photovoltaic cells based on poly(3-hexylthiophene):[6,6]-phenyl-C61 -butyric acid methyl ester. We employed high-speed vibrational milling to disperse the n-PEDOTs into an aqueous PSS medium. Raman spectroscopy measurements revealed quinoid-dominated structures for these aqueous-soluble n-PEDOT:PSS materials. The presence of the 1D n-PEDOTs in the buffer layer improved the photovoltaic performance (ηAM1.5=3.10%) of the polymer solar cell relative to that of the system prepared using the unmodified PEDOT:PSS (ηAM1.5=2.17%) . This enhancement was accompanied by an increase in the values of JSC (from 5.85to7.62mA/cm2 ) and the fill factor (from 0.58 to 0.64). The conductivity and polarity of the n-PEDOT–modified buffer layer increased upon increasing the content of n-PEDOT, resulting in increases of the short-circuit current, open-circuit voltage, and power conversion efficiency of the polymer solar cell incorporating the 1D n-PEDOTs.

影响因子
3.259
论文下载
作者

Yu-Kai Han,Mei-Ying Chang,Wen-Yao Huang,Hsin-Yu Pan,Ko-Shan Ho,Tar-Hwa Hsieh,and Sin-Yu Pan.

期刊

J.Electrochem.Soc.,158,3,K88-K93(2011)

年份